Logistic Straps

Made In USA
Logistic straps are also known as interior van straps. They provide a means of securing your cargo safely in place during transit and are designed for use inside a van utilizing the E-rail system. Our straps are premium, tensile strength tested polyester webbing for maximum durability. The short end measures at four feet long while the long end is determine by the overall length of the webbing. Each length of webbing Is color coded based on length; yellow for 12 feet, grey for 16 feet, and blue for 20 feet. They are available in 2 widths only and in either quick release cam buckle form or ratchet form based on preference and overall capacity.

Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective.

Safety Working Load
: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity. Rated capacity: The minimum load a complete assembly will withstand before failure in a laboratory setting when the product is new.

Copyright © 2018 BOXER TOOLS / BOXER TIE DOWN. Powered by Trade of Amta Inc.