Our hand power pullers also call as Come-A-Long are selected from a premium manufacturer. Featuring a double locking and double pawl design in the heavy duty line up with capacities ranging from 1 ton to 4 tons. Heavy duty stamped steel, double safety release, and 1 piece frame construction are found in our hand power pullers. Cable widths are available in 5mm to 6mm thicknesses or for furniture moving a webbing fed unit is available for non-scratch purpose.
Caution: make sure your Hand Power Puller is maintained in safe and proper working condition by observing the following rules:
Inspect cable regularly for frays, kinks, broken strands or distortion. The cable should be replaced once one of the above situations has occurred.
Do not pull cable over or around a corner.
Do not wrap cable around any object and hook it back on itself.
Do not overload the unit; verify how much load is allowed when you are pulling.
Do not use a cheater pipe or other device to lengthen the handle for additional leverage.
Do not operated puller with less than 3 wraps of cable on the spindle.
Please use an adequate sling, eye bolt, or other accessory attached to the load to be pulled.
Make sure that there is positive engagement of the puller hook to the load.
Safety Working Load: The Hand Power Puller maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Rated capacity: The minimum load a complete assembly will withstand before failure in a laboratory setting when the product is new.
Hand Power Pullers/Come-A-Long