1 to 2 Inches Tie Downs

Our 1 to 2 inches Tie Down is used primarily for light duty jobs around the house and workplace. Capacity ranges from 700 lbs to 3000 lbs and are available in either cam buckle form or ratchet buckle. 1 inch straps are made from high quality, strength tested polyester for maximum durability. Our 1 Inch Tie Down come shrink wrapped or plastic clam shell packaging. Colors are available in red or blue.

Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective.

Safety Working Load
: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity. Rated capacity: The minimum load a complete assembly will withstand before failure in a laboratory setting when the product is new.

Copyright © 2017 BOXER TOOLS / BOXER TIE DOWN. Powered by Trade of Amta Inc.