Cargo Nets

Cargo nets can be used to secure your truck load during transit. Net sizes range from 15”x15” to 12’x12’ and comes in bungee or 1” heavy duty webbing form. Five different styles are available from our 4-arm spider net to the 36”x48” cargo net with 12 hooks. For heavy duty loads, the 12’x12’ 1” webbing cargo net has a rated capacity of up to 2000 lbs. Don’t risk losing your cargo on the road without a cargo net or tie down.

Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective.

Safety working load
: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity. Rated capacity: The minimum load a complete assembly will withstand before failure in a laboratory setting when the product is new.

Copyright © 2018 BOXER TOOLS / BOXER TIE DOWN. Powered by Trade of Amta Inc.